Mobile Software and Hardware Solution

Samsung Galaxy Grand Prime Battery Connector Terminal Jumper Ways

Problem:-

Samsung Galaxy Grand Prime Dead Solution

Samsung Galaxy Grand Prime Battery Track Ways

Samsung Galaxy Grand Prime Battery Connector Jumper

Samsung Galaxy Grand Prime Terminal Jumper Ways

[caption id="attachment_19251" align="alignnone" width="300"] Samsung Galaxy Grand Prime Battery Connector Terminal Jumper Ways[/caption]
Diagnostics:-

If Samsung Galaxy Grand Prime is not getting power ON, Replace the battery and try to power it ON. Plug in charging pin into jack and try to make it charge. Check batter terminal's +v and -V points with electronics meter.

Solution:-

Dis assemble the phone Samsung Galaxy Grand Prime and check battery connectors if these are lose or not fix. Then check the whole mother board for water and rust damages, Carbon or broken parts.

If find some rust or carbon make it clean with electronics cleaner and apply hot air with heat gun to make it dry.

Find out these parts that are identified in above diagram and make check for volts. If find some broken parts or tracks are missing then apply jumpers as given in above diagrams.

Samsung Galaxy Grand Prime,Nokia,Battery Terminal,Battery Points,Battery Jack Problem,Battery Terminal Solution,Battery Terminal Jumpers,Battery Power Ways

Samsung Galaxy Grand Prime, Battery Consume, Battery Terminal, Battery Terminal Jumpers, Battery Terminal Solution,Battery Connector , Battery Connector Jumpers, Battery Connector Solution,

Samsung Galaxy A5 Insert Sim IC Solution Jumper Problem Ways

in case of insert sim problem in Samsung Galaxy A5 it will show insert sim, sim not valid, and may not show signal.to solve Samsung Galaxy A5 Insert Sim IC Solution Jumper Problem Ways we have to do a few simple steps as given in this post.in first step replace you sim and try it.scratch sim points in mobile slightly then try.
[caption id="attachment_19239" align="alignnone" width="300"] Samsung Galaxy A5 Insert Sim IC Solution Jumper Problem Ways[/caption]
after dis assembly check all sim jack points at mother board with meter.check all these parts and track that are given in above diagram and if any of them is missing apply jumpers to make that path in good condition.if any of the components is missing replace it with new.

you can change sim ic also and may can apply jumpers after removing ic from mother board.there are some posts also to describe that how to make jumpers in sim ic to solve insert sim problem.

For more information and new tips and tricks about this problem solution keep visiting this page we will update it if there will be new updates.some related post are also given below you can read more about mobile phone.

Please note that although every diagram & solution posted on our website has been tested by one or more members of our team before posting,so we will not be responsible for any loss or damage, including personal injury.Use this repair solutions at your own risk.

Samsung Galaxy A5,Nokia,Insert Sim,Sim,Solution,Jumper,Problem,Ways

Samsung Galaxy A5 Insert Sim IC Solution Jumper Problem Ways Sim Not Working Sim Not Valid

Samsung Galaxy A5,Nokia,Insert Sim,Sim,Insert Sim Problem,Insert Sim Solution,Insert Sim Jumpers,Insert Sim Ways

Samsung Galaxy S6 Edge Voluem Up Down Keys Not Working Problem Solution Jumpers

Problem:-
1-

Samsung Galaxy S6 Edge Volume Up Key is Not Working

2-

Samsung Galaxy S6 Edge Volume Down Key is Not Working

Tools:-
1-Hot Air is required.
2-Solding iron is required.
3-Skrue driver keys.
4-Electronics cleaner.
5-Four leg On of Switch ( Volume Key Switch ).
6-old board of Samsung Galaxy S6 Edge if a few parts are damage in this board.So that they can be replaced.
[caption id="attachment_19236" align="alignnone" width="300"] Samsung Galaxy S6 Edge Voluem Up Down Keys Not Working Problem Solution Jumpers[/caption]

Solution:-
If Volume Up or Down key is not working in Samsung Galaxy S6 Edge then it can be the cause of Volume Switch or Resistance near by it.
So disassemble mobile phone and check whole mother board.
If there is some rust or carbon clean it with electronics cleaner and apply some heat so that it can be dry.
Check these tracks as shown in red and green lines in above diagram.
If some prints are missing or a few parts are damage apply jumpers or replace damaged parts.
If Volume Switch is damage or broken then replace it with new one.
Warnings:
Do not apply much heat it can be harm for your skin and mobile phone.
Try that board get fully dry.
When you are removing old volume switch make sure you will not damage prints from mother board so remove it when solding iron is too much hot.Or remove it with hot air.

Volume Button, Volume Keys, Volume Up, Volume Down

Samsung I9300 Galaxy S III LCD Display Light IC Solution Jumper Problem Ways

if lcd light is not workin in Samsung I9300 Galaxy S III then we will not be able to watch any text on display.light can be dim or may be blank.Samsung I9300 Galaxy S III LCD Display Light IC Solution Jumper Problem Ways can be solve in a few steps as given in this post.
[caption id="attachment_19232" align="alignnone" width="300"] Samsung I9300 Galaxy S III LCD Display Light IC Solution Jumper Problem Ways[/caption]
after dis assambling Samsung I9300 Galaxy S III chek mother board if there is any carbon water damage or rust.clean whole board with electronics cleaner and then apply hot air for a few mints so that it can be dry.

replae led if it is a jack lcd and if it is pasted then after removing check its prints value.if value is ok then replae lcd and if alue is missing then check whole parts componenets as iven in above diagram.check all paths and if any tracks of them is missing apply jumpers.

it will help you to solve Samsung I9300 Galaxy S III LCD Display Light IC Solution Jumper Problem Ways
easly.

For more information and new tips and tricks about this problem solution keep visiting this page we will update it if there will be new updates.some related post are also given below you can read more about mobile phone.

Please note that although every diagram & solution posted on our website has been tested by one or more members of our team before posting,so we will not be responsible for any loss or damage, including personal injury.Use this repair solutions at your own risk.

Samsung I9300 Galaxy S III,Nokia,LCD,Display,Solution,Jumper,Proble,Ways

Samsung I9300 Galaxy S III LCD Display Light IC Solution Jumper Problem Ways LCD Display Light Not Working

Samsung I9300 Galaxy S III,Nokia,LCD Display Light,Display Light Problem,Display Light Solution,Display Light Jumpers,Display Light Ways,White Display ,Blinking Display,Blank Display,Keypad Light

Samsung Galaxy Core Touch screen Not Working Problem Solution Jumper Ways

Samsung Galaxy Core Touch Screen Connector Problem Jumper Solution Ways

Problem:-
Samsung Galaxy Core touch screen not working, Samsung Galaxy Core touch is missing from some positions, Samsung Galaxy Core touch screen jumper ways.
[caption id="attachment_19229" align="alignnone" width="300"] Samsung Galaxy Core Touch screen Not Working Problem Solution Jumper Ways[/caption]
Diagnostics:-
Check touch screen of Samsung Galaxy Core, is it working, not working, or missing for some points. Make a screen test if possible and then try celebration if possible.

If you are looking for and having trouble finding where to put a bridge if the pin connector and touch screen is gone or terminated due to water damaged Samsung Galaxy Core0 in the water. This solution may help relieve your hard to find out where solder a jumper wire in it just to fix a problem touch screen not working.

This solution shows exactly the ways of the connecting pin connector touch screen design PCB Samsung Galaxy Core. You may just need to check the corresponding output pins cut if the connection already or have a circuit open, then solder a bridge over it, since it's only options.

Samsung Galaxy Core,Nokia,Touch Screen, Touch Problem, Touch Solution,Touch Screen Ways,Touch Screen Jumpers

Samsung Galaxy Alpha Usb Charging Problem Solution Jumper Ways

Problem:-
Samsung Galaxy Alpha usb charging solution,
Samsung Galaxy Alpha usb not recognised not detected

Diagnostics:-
Plug in usb cable into PC and Phone jack, Read notifications on the screen phone recognised or not. Check out you can save data to memory card or not. Replace usb data cable and try again.

Replace Usb charger and try again can it charge or not.

Solution:-
If you are facing charging problem in Samsung Galaxy Alpha and have test all above steps to solve this problem in it. Dis assemble the phone and then look at phone for water and carbon damages. Make it clean with electronics cleaner and apply heat with heat gun to make it dry.

Keep in mind heat should not be more and much because it can harm your skin and damage the mother board. So keep it in normal flow and look at the parts carefully.

Track all these paths and components as shown in diagram above. all these tracks are given in different colors so that you can find out the jumper ways easily.

Samsung Galaxy Alpha,Usb,Charging,Problem,Solution,Jumper,Ways

Samsung Galaxy Alpha, usb not charging, Usb not recognized, charging not save, not charging

Samsung I9003 Galaxy SL Usb Charging Problem Solution Jumper Ways

Problem:-
Samsung I9003 Galaxy SL usb charging solution,
Samsung I9003 Galaxy SL usb not recognised not detected

Diagnostics:-
Plug in usb cable into PC and Phone jack, Read notifications on the screen phone recognised or not. Check out you can save data to memory card or not. Replace usb data cable and try again.

Replace Usb charger and try again can it charge or not.

Solution:-
If you are facing charging problem in Samsung I9003 Galaxy SL and have test all above steps to solve this problem in it. Dis assemble the phone and then look at phone for water and carbon damages. Make it clean with electronics cleaner and apply heat with heat gun to make it dry.

Keep in mind heat should not be more and much because it can harm your skin and damage the mother board. So keep it in normal flow and look at the parts carefully.

Track all these paths and components as shown in diagram above. all these tracks are given in different colors so that you can find out the jumper ways easily.

Samsung I9003 Galaxy SL,Usb,Charging,Problem,Solution,Jumper,Ways

Samsung I9003 Galaxy SL, usb not charging, Usb not recognized, charging not save, not charging

Samsung Galaxy J2 Battery Connector Terminal Jumper Ways

Problem:-

Samsung Galaxy J2 Dead Solution

Samsung Galaxy J2 Battery Track Ways

Samsung Galaxy J2 Battery Connector Jumper

Samsung Galaxy J2 Terminal Jumper Ways

[caption id="attachment_19219" align="alignnone" width="300"] Samsung Galaxy J2 Battery Connector Terminal Jumper Ways[/caption]
Diagnostics:-

If Samsung Galaxy J2 is not getting power ON, Replace the battery and try to power it ON. Plug in charging pin into jack and try to make it charge. Check batter terminal's +v and -V points with electronics meter.

Solution:-

Dis assemble the phone Samsung Galaxy J2 and check battery connectors if these are lose or not fix. Then check the whole mother board for water and rust damages, Carbon or broken parts.

If find some rust or carbon make it clean with electronics cleaner and apply hot air with heat gun to make it dry.

Find out these parts that are identified in above diagram and make check for volts. If find some broken parts or tracks are missing then apply jumpers as given in above diagrams.

Samsung Galaxy J2,Nokia,Battery Terminal,Battery Points,Battery Jack Problem,Battery Terminal Solution,Battery Terminal Jumpers,Battery Power Ways

Samsung Galaxy J2, Battery Consume, Battery Terminal, Battery Terminal Jumpers, Battery Terminal Solution,Battery Connector , Battery Connector Jumpers, Battery Connector Solution,

Samsung Galaxy J2 Voluem Up Down Keys Not Working Problem Solution Jumpers

Problem:-
1-

Samsung Galaxy J2 Volume Up Key is Not Working

2-

Samsung Galaxy J2 Volume Down Key is Not Working

Tools:-
1-Hot Air is required.
2-Solding iron is required.
3-Skrue driver keys.
4-Electronics cleaner.
5-Four leg On of Switch ( Volume Key Switch ).
6-old board of Samsung Galaxy J2 if a few parts are damage in this board.So that they can be replaced.

[caption id="attachment_19216" align="alignnone" width="300"] Samsung Galaxy J2 Voluem Up Down Keys Not Working Problem Solution Jumpers[/caption]
Solution:-
If Volume Up or Down key is not working in Samsung Galaxy J2 then it can be the cause of Volume Switch or Resistance near by it.
So disassemble mobile phone and check whole mother board.
If there is some rust or carbon clean it with electronics cleaner and apply some heat so that it can be dry.
Check these tracks as shown in red and green lines in above diagram.
If some prints are missing or a few parts are damage apply jumpers or replace damaged parts.
If Volume Switch is damage or broken then replace it with new one.
Warnings:
Do not apply much heat it can be harm for your skin and mobile phone.
Try that board get fully dry.
When you are removing old volume switch make sure you will not damage prints from mother board so remove it when solding iron is too much hot.Or remove it with hot air.

Volume Button, Volume Keys, Volume Up, Volume Down

Samsung Galaxy J2 Speaker Solution Jumper Problem Ways Earpeace

if we have a speaker problem in Samsung Galaxy J2 we will not be able to hear voice of call.we can temporary solve this issu by using Loud Speaker but to fix this problem we have to do a few basic diagnostics and steps to solve Samsung Galaxy J2 Speaker Solution Jumper Problem Ways Earpeace.
[caption id="attachment_19213" align="alignnone" width="300"] Samsung Galaxy J2 Speaker Solution Jumper Problem Ways Earpeace[/caption]
Open Mobile and check speaker points with a meter if they do not show continuty then speaker is dead and if they show a good value chak speaker attachement prints on board do they have value also then change speaker with new one.if speaker changing can not solve this issue check all these parts and track that used in speaker function in Samsung Galaxy J2.

All parts components and tracks can be found in diagram above so check these components and also clean near by area of these parts.dry it with hot air and ceck all tracks with meter if missing apply jumpers and you may can change resold or replace these parts one by one till you solve Samsung Galaxy J2 Speaker Solution Jumper Problem Ways Earpeace

For more information and new tips and tricks about this problem solution keep visiting this page we will update it if there will be new updates.some related post are also given below you can read more about mobile phone.

Please note that although every diagram & solution posted on our website has been tested by one or more members of our team before posting,so we will not be responsible for any loss or damage, including personal injury.Use this repair solutions at your own risk.

Samsung Galaxy J2,Nokia,Speaker ,Earpeace,Solution,Jumper,Problem,Ways

Samsung Galaxy J2 Speaker Solution Jumper Problem Ways Speaker Not Working Earpeace

Samsung Galaxy J2,Nokia,Speaker,Earpeace,Speaker Problem,Speaker Solution,Speaker Jumpers,Speaker Ways

Samsung Galaxy Note 3 Neo Voluem Up Down Keys Not Working Problem Solution Jumpers

Problem:-
1-

Samsung Galaxy Note 3 Neo Volume Up Key is Not Working

2-

Samsung Galaxy Note 3 Neo Volume Down Key is Not Working

Tools:-
1-Hot Air is required.
2-Solding iron is required.
3-Skrue driver keys.
4-Electronics cleaner.
5-Four leg On of Switch ( Volume Key Switch ).
6-old board of Samsung Galaxy Note 3 Neo if a few parts are damage in this board.So that they can be replaced.
[caption id="attachment_19209" align="alignnone" width="300"] Samsung Galaxy Note 3 Neo Voluem Up Down Keys Not Working Problem Solution Jumpers[/caption]

Solution:-
If Volume Up or Down key is not working in Samsung Galaxy Note 3 Neo then it can be the cause of Volume Switch or Resistance near by it.
So disassemble mobile phone and check whole mother board.
If there is some rust or carbon clean it with electronics cleaner and apply some heat so that it can be dry.

[caption id="attachment_19210" align="alignnone" width="239"] Samsung Galaxy Note 3 Neo Voluem Up Down Keys Not Working Problem Solution Jumpers[/caption]
Check these tracks as shown in red and green lines in above diagram.
If some prints are missing or a few parts are damage apply jumpers or replace damaged parts.
If Volume Switch is damage or broken then replace it with new one.
Warnings:
Do not apply much heat it can be harm for your skin and mobile phone.
Try that board get fully dry.
When you are removing old volume switch make sure you will not damage prints from mother board so remove it when solding iron is too much hot.Or remove it with hot air.

Volume Button, Volume Keys, Volume Up, Volume Down

Samsung Galaxy Note 3 Neo Insert Sim IC Solution Jumper Problem Ways

in case of insert sim problem in Samsung Galaxy Note 3 Neo it will show insert sim, sim not valid, and may not show signal.to solve Samsung Galaxy Note 3 Neo Insert Sim IC Solution Jumper Problem Ways we have to do a few simple steps as given in this post.in first step replace you sim and try it.scratch sim points in mobile slightly then try.
[caption id="attachment_19206" align="alignnone" width="300"] Samsung Galaxy Note 3 Neo Insert Sim IC Solution Jumper Problem Ways[/caption]
after dis assembly check all sim jack points at mother board with meter.check all these parts and track that are given in above diagram and if any of them is missing apply jumpers to make that path in good condition.if any of the components is missing replace it with new.

you can change sim ic also and may can apply jumpers after removing ic from mother board.there are some posts also to describe that how to make jumpers in sim ic to solve insert sim problem.

For more information and new tips and tricks about this problem solution keep visiting this page we will update it if there will be new updates.some related post are also given below you can read more about mobile phone.

Please note that although every diagram & solution posted on our website has been tested by one or more members of our team before posting,so we will not be responsible for any loss or damage, including personal injury.Use this repair solutions at your own risk.

Samsung Galaxy Note 3 Neo,Nokia,Insert Sim,Sim,Solution,Jumper,Problem,Ways

Samsung Galaxy Note 3 Neo Insert Sim IC Solution Jumper Problem Ways Sim Not Working Sim Not Valid

Samsung Galaxy Note 3 Neo,Nokia,Insert Sim,Sim,Insert Sim Problem,Insert Sim Solution,Insert Sim Jumpers,Insert Sim Ways

Samsung Galaxy Note 3 Neo LCD Display Light IC Solution Jumper Problem Ways

if lcd light is not workin in Samsung Galaxy Note 3 Neo then we will not be able to watch any text on display.light can be dim or may be blank.Samsung Galaxy Note 3 Neo LCD Display Light IC Solution Jumper Problem Ways can be solve in a few steps as given in this post.
[caption id="attachment_19203" align="alignnone" width="300"] Samsung Galaxy Note 3 Neo LCD Display Light IC Solution Jumper Problem Ways[/caption]
after dis assambling Samsung Galaxy Note 3 Neo chek mother board if there is any carbon water damage or rust.clean whole board with electronics cleaner and then apply hot air for a few mints so that it can be dry.

replae led if it is a jack lcd and if it is pasted then after removing check its prints value.if value is ok then replae lcd and if alue is missing then check whole parts componenets as iven in above diagram.check all paths and if any tracks of them is missing apply jumpers.

it will help you to solve Samsung Galaxy Note 3 Neo LCD Display Light IC Solution Jumper Problem Ways
easly.

For more information and new tips and tricks about this problem solution keep visiting this page we will update it if there will be new updates.some related post are also given below you can read more about mobile phone.

Please note that although every diagram & solution posted on our website has been tested by one or more members of our team before posting,so we will not be responsible for any loss or damage, including personal injury.Use this repair solutions at your own risk.

Samsung Galaxy Note 3 Neo,Nokia,LCD,Display,Solution,Jumper,Proble,Ways

Samsung Galaxy Note 3 Neo LCD Display Light IC Solution Jumper Problem Ways LCD Display Light Not Working

Samsung Galaxy Note 3 Neo,Nokia,LCD Display Light,Display Light Problem,Display Light Solution,Display Light Jumpers,Display Light Ways,White Display ,Blinking Display,Blank Display,Keypad Light

Samsung Galaxy Note 3 Neo Battery Connector Terminal Jumper Ways

Problem:-

Samsung Galaxy Note 3 Neo Dead Solution

Samsung Galaxy Note 3 Neo Battery Track Ways

Samsung Galaxy Note 3 Neo Battery Connector Jumper

Samsung Galaxy Note 3 Neo Terminal Jumper Ways

[caption id="attachment_19199" align="alignnone" width="300"] Samsung Galaxy Note 3 Neo Battery Connector Terminal Jumper Ways[/caption]
Diagnostics:-

If Samsung Galaxy Note 3 Neo is not getting power ON, Replace the battery and try to power it ON. Plug in charging pin into jack and try to make it charge. Check batter terminal's +v and -V points with electronics meter.
[caption id="attachment_19200" align="alignnone" width="300"] Samsung Galaxy Note 3 Neo Battery Connector Terminal Jumper Ways[/caption]
Solution:-

Dis assemble the phone Samsung Galaxy Note 3 Neo and check battery connectors if these are lose or not fix. Then check the whole mother board for water and rust damages, Carbon or broken parts.

If find some rust or carbon make it clean with electronics cleaner and apply hot air with heat gun to make it dry.

Find out these parts that are identified in above diagram and make check for volts. If find some broken parts or tracks are missing then apply jumpers as given in above diagrams.

Samsung Galaxy Note 3 Neo,Nokia,Battery Terminal,Battery Points,Battery Jack Problem,Battery Terminal Solution,Battery Terminal Jumpers,Battery Power Ways

Samsung Galaxy Note 3 Neo, Battery Consume, Battery Terminal, Battery Terminal Jumpers, Battery Terminal Solution,Battery Connector , Battery Connector Jumpers, Battery Connector Solution,

Samsung Galaxy J5 Usb Not Charging Solution Jumper

Problem:-
Samsung Galaxy J5 usb charging solution,
Samsung Galaxy J5 usb not recognised not detected

Diagnostics:-
Plug in usb cable into PC and Phone jack, Read notifications on the screen phone recognised or not. Check out you can save data to memory card or not. Replace usb data cable and try again.
[caption id="attachment_19194" align="alignnone" width="300"] Samsung Galaxy J5 Usb Charging Problem Solution Jumper Ways[/caption]
Replace Usb charger and try again can it charge or not.

Solution:-
If you are facing charging problem in Samsung Galaxy J5 and have test all above steps to solve this problem in it. Dis assemble the phone and then look at phone for water and carbon damages. Make it clean with electronics cleaner and apply heat with heat gun to make it dry.

Keep in mind heat should not be more and much because it can harm your skin and damage the mother board. So keep it in normal flow and look at the parts carefully.

Track all these paths and components as shown in diagram above. all these tracks are given in different colors so that you can find out the jumper ways easily.

Samsung Galaxy J5,Usb,Charging,Problem,Solution,Jumper,Ways

Samsung Galaxy J5, usb not charging, Usb not recognized, charging not save, not charging

Samsung Galaxy J5 Mic Solution Jumper Problem Ways Microphone

Samsung Galaxy J5 Mic problem can be solve in a few steps as given in this post.How we can find Mic fault into a cellphone is very easy way.when ever our voice can not reach to destination monbile phone or we can not recored our own voice in voice recorder of cell phone it means it Mic not working.If a Samsung Galaxy J5 Mic is not working then Mic problem can be solve in given bellow steps that are provided in diagram bellow.
[caption id="attachment_19191" align="alignnone" width="300"] Samsung Galaxy J5 Mic Solution Jumper Problem Ways Microphone[/caption]
First step is open mobile and check Samsung Galaxy J5 Mic points on borad if there is a good value in it then change Mic with new one.Problem will be solve. if only mic points do not show value then chek all mic track and parts that are used in mic function in Samsung Galaxy J5.all mic parts and track are given in bellow diagram check all these parts and components and if necesory resold or change them.this will help you in Samsung Galaxy J5 Mic Solution Jumper Problem Ways Microphone

For more information and new tips and tricks about this problem solution keep visiting this page we will update it if there will be new updates.some related post are also given below you can read more about mobile phone.

Please note that although every diagram & solution posted on our website has been tested by one or more members of our team before posting,so we will not be responsible for any loss or damage, including personal injury.Use this repair solutions at your own risk.

Samsung Galaxy J5,Nokia,Mic,microphone,Solution,Jumper,Problem,Ways

Samsung Galaxy J5 Mic Solution Jumper Problem Ways Mic Not Working Microphone

Samsung Galaxy J5,Nokia,Mic,Microphone,Mic Problem,Mic Solution,Mic Jumpers,Mic Ways

Samsung Galaxy J5 LCD Display Light IC Solution Jumper Problem Ways

if lcd light is not working in Samsung Galaxy J5 then we will not be able to watch any text on display.light can be dim or may be blank.Samsung Galaxy J5 LCD Display Light IC Solution Jumper Problem Ways can be solve in a few steps as given in this post.

after dis assambling Samsung Galaxy J5 chek mother board if there is any carbon water damage or rust.clean whole board with electronics cleaner and then apply hot air for a few mints so that it can be dry.

replae led if it is a jack lcd and if it is pasted then after removing check its prints value.if value is ok then replae lcd and if alue is missing then check whole parts componenets as iven in above diagram.check all paths and if any tracks of them is missing apply jumpers.

it will help you to solve Samsung Galaxy J5 LCD Display Light IC Solution Jumper Problem Ways
easly.

For more information and new tips and tricks about this problem solution keep visiting this page we will update it if there will be new updates.some related post are also given below you can read more about mobile phone.

Please note that although every diagram & solution posted on our website has been tested by one or more members of our team before posting,so we will not be responsible for any loss or damage, including personal injury.Use this repair solutions at your own risk.

Samsung Galaxy J5,Nokia,LCD,Display,Solution,Jumper,Proble,Ways

Samsung Galaxy J5 LCD Display Light IC Solution Jumper Problem Ways LCD Display Light Not Working

Samsung Galaxy J5,Nokia,LCD Display Light,Display Light Problem,Display Light Solution,Display Light Jumpers,Display Light Ways,White Display ,Blinking Display,Blank Display,Keypad Light

Samsung Galaxy J5 Battery Terminal Jumper Connector Ways

Problem:-

Samsung Galaxy J5 Dead Solution

Samsung Galaxy J5 Battery Track Ways

Samsung Galaxy J5 Battery Connector Jumper

Samsung Galaxy J5 Terminal Jumper Ways

[caption id="attachment_19184" align="alignnone" width="300"] Samsung Galaxy J5 Battery Connector Terminal Jumper Ways[/caption]
Diagnostics:-

If Samsung Galaxy J5 is not getting power ON, Replace the battery and try to power it ON. Plug in charging pin into jack and try to make it charge. Check batter terminal's +v and -V points with electronics meter.

Solution:-

Dis assemble the phone Samsung Galaxy J5 and check battery connectors if these are lose or not fix. Then check the whole mother board for water and rust damages, Carbon or broken parts.

If find some rust or carbon make it clean with electronics cleaner and apply hot air with heat gun to make it dry.

Find out these parts that are identified in above diagram and make check for volts. If find some broken parts or tracks are missing then apply jumpers as given in above diagrams.

Samsung Galaxy J5,Nokia,Battery Terminal,Battery Points,Battery Jack Problem,Battery Terminal Solution,Battery Terminal Jumpers,Battery Power Ways

Samsung Galaxy J5, Battery Consume, Battery Terminal, Battery Terminal Jumpers, Battery Terminal Solution,Battery Connector , Battery Connector Jumpers, Battery Connector Solution,

Samsung Galaxy Core I8260 Usb Charging Problem Solution Jumper Ways

Problem:-
Samsung Galaxy Core I8260 usb charging solution,
Samsung Galaxy Core I8260 usb not recognised not detected

Diagnostics:-
Plug in usb cable into PC and Phone jack, Read notifications on the screen phone recognised or not. Check out you can save data to memory card or not. Replace usb data cable and try again.

Replace Usb charger and try again can it charge or not.

Solution:-
If you are facing charging problem in Samsung Galaxy Core I8260 and have test all above steps to solve this problem in it. Dis assemble the phone and then look at phone for water and carbon damages. Make it clean with electronics cleaner and apply heat with heat gun to make it dry.

Keep in mind heat should not be more and much because it can harm your skin and damage the mother board. So keep it in normal flow and look at the parts carefully.

Track all these paths and components as shown in diagram above. all these tracks are given in different colors so that you can find out the jumper ways easily.

Samsung Galaxy Core I8260,Usb,Charging,Problem,Solution,Jumper,Ways

Samsung Galaxy Core I8260, usb not charging, Usb not recognized, charging not save, not charging

Samsung Galaxy Core I8260 Power On Off Button Ways

Here is the solution for Samsung Galaxy Core I8260 key not work on / off problem. This solution may help fix if the phone shows charging indication or charging icon when the battery charger is plug-in, but could not or can not turn it on.
[caption id="attachment_19177" align="alignnone" width="300"] Samsung Galaxy Core I8260 Power On Off Button Ways[/caption]
Samsung Galaxy Core I8260 Power On Off Key Jumper, Track, Ways
Samsung Galaxy Core I8260 On



Samsung Galaxy Core I8260 In the power ON-OFF, other than it is in the matrix keyboard flex is also connected to the keyboard filter IC. The solution below shows the connection line paths of the power key, this is useful without changing the filter IC and this can be used without having to connect the power key filter IC.

Just refer to the solution given below and track said main power line roads.

Only manage to apply a jumper wire in places where the Samsung Galaxy Core I8260 connecting said power key. This can help change without compromising the IC filter matrix or keyboard flex.

Samsung Galaxy Core I8260,Nokia,Power Button,Power Key,Power Switch,On Off Button, On Off Switch, Powerr Problem