Mobile Software and Hardware Solution

Samsung Galaxy Tab E T560 Power On Off Button Ways

Here is the solution for Samsung Galaxy Tab E T560 key not work on / off problem. This solution may help fix if the phone shows charging indication or charging icon when the battery charger is plug-in, but could not or can not turn it on.

Samsung Galaxy Tab E T560 Power On Off Key Jumper, Track, Ways
Samsung Galaxy Tab E T560 On



Samsung Galaxy Tab E T560 In the power ON-OFF, other than it is in the matrix keyboard flex is also connected to the keyboard filter IC. The solution below shows the connection line paths of the power key, this is useful without changing the filter IC and this can be used without having to connect the power key filter IC.

Just refer to the solution given below and track said main power line roads.

Only manage to apply a jumper wire in places where the Samsung Galaxy Tab E T560 connecting said power key. This can help change without compromising the IC filter matrix or keyboard flex.

Samsung Galaxy Tab E T560,Nokia,Power Button,Power Key,Power Switch,On Off Button, On Off Switch, Powerr Problem

Samsung Galaxy Tab E T560 Voluem Up Down Keys Not Working Problem Solution Jumpers

Problem:-
1-

Samsung Galaxy Tab E T560 Volume Up Key is Not Working

2-

Samsung Galaxy Tab E T560 Volume Down Key is Not Working

Tools:-
1-Hot Air is required.
2-Solding iron is required.
3-Skrue driver keys.
4-Electronics cleaner.
5-Four leg On of Switch ( Volume Key Switch ).
6-old board of Samsung Galaxy Tab E T560 if a few parts are damage in this board.So that they can be replaced.


Solution:-
If Volume Up or Down key is not working in Samsung Galaxy Tab E T560 then it can be the cause of Volume Switch or Resistance near by it.
So disassemble mobile phone and check whole mother board.
If there is some rust or carbon clean it with electronics cleaner and apply some heat so that it can be dry.
Check these tracks as shown in red and green lines in above diagram.
If some prints are missing or a few parts are damage apply jumpers or replace damaged parts.
If Volume Switch is damage or broken then replace it with new one.
Warnings:
Do not apply much heat it can be harm for your skin and mobile phone.
Try that board get fully dry.
When you are removing old volume switch make sure you will not damage prints from mother board so remove it when solding iron is too much hot.Or remove it with hot air.

Samsung Galaxy Tab E T560 Usb Charging Problem Solution Jumper Ways

Problem:-
Samsung Galaxy Tab E T560 usb charging solution,
Samsung Galaxy Tab E T560 usb not recognised not detected

Diagnostics:-
Plug in usb cable into PC and Phone jack, Read notifications on the screen phone recognised or not. Check out you can save data to memory card or not. Replace usb data cable and try again.

Replace Usb charger and try again can it charge or not.

Solution:-
If you are facing charging problem in Samsung Galaxy Tab E T560 and have test all above steps to solve this problem in it. Dis assemble the phone and then look at phone for water and carbon damages. Make it clean with electronics cleaner and apply heat with heat gun to make it dry.

Keep in mind heat should not be more and much because it can harm your skin and damage the mother board. So keep it in normal flow and look at the parts carefully.

Track all these paths and components as shown in diagram above. all these tracks are given in different colors so that you can find out the jumper ways easily.

Samsung Galaxy Tab E T560,Usb,Charging,Problem,Solution,Jumper,Ways

usb not charging, Usb not recognized, charging not save, not charging