Mobile Software and Hardware Solution

General instructions(important thimgs)

Turn off your Samsung telephone

Embed a non-acknowledged sim card (not quite the same as the first transporter).

Turn on the telephone.

Slide to open and it will request the open code

Enter the open code you acquired from UnlockRiver.com

Your telephone is presently completely opened!

Picture result for how to nation open code for samsung to other android gadget

Picture result for how to nation open code for samsung to other android gadget

On the off chance that you enter a non-acknowledged Sim Card and your telephone does not incite to enter Unlock Code:

Technique 2:

Turn off your Samsung telephone

Embed a non-acknowledged sim card

Once the telephone stop is impaired, the Network lock or SP Lock screen will show up

For Network lock enter the UNLOCK code gave. For SP Lock enter the SERVICE PROVIDER code

Your telephone is currently completely opened!

In the event that you get "unsuccessful" again then hit Dismiss catch and sort *2767*3855# on telephone keypad and attempt this technique once more (CAUTION! This will reformat all your dataand other essential thing .please expelled vital information from your gadget

Instructions to enter open code on Samsung models: SGH-A127, SGH-E840, SGH-F210, SGH-J600, SGH-T749

at first plrease root your gadget utilizing reasonable establishing record then inistall the supeuse application

much the same as "superus" then please associate your gadget with PC nad labtop whatever other gadget an interface with z3x box or other organization approved samsung document open the samung z3x box you can discovered open alternative snap on the choice after few secon your telephone compleately open .then please enter code simply like 00000000 11111111 number propose from top of box cornor .please attempt it

The most effective method to enter open code on Samsung telephones from: AT&T/Cingular BlackJack

Insert a non-recognized Sim Card and turn ON your phone

Power on the device. Hold up around 30 seconds until the Sim Lock application shows up (the deferral may be longer if the customer has formally attempted an open with the wrong code)

Enter the open code free field

Press Ok. In case the Unlock Code is off course, a goof talk will appear. In the wake of pressing Ok on this trade, the customer needs to re-enter the Unlock Code after deferrals (see above in Device Specific Information). If the Unlock Code is correct, a win trade will appear.

Press Ok

The device is right now opened and should continue booting

Press Ok

The device is right now opened and should continue booting

NOTE: If you can't associate with administration supplier or not able to make active calls or get messages, this has nothing to do with your telephone being bolted or opened, you have to compel the BlackJack to change to GSM mode, this should be possible as takes after:

Power on your Phone

Sort *#1546792*#

Select Option 3 Network and Call Settings

Select choice 5 Network Mode

Select GSM

Instructions to enter open code on Samsung Models: i450 and i560

Turn ON your telephone without Sim Card

Sort #PW+Unlock Code+1#

The letter P show up after you squeeze star catch (*) three times rapidly

The letter W show up after you press the star catch (*) four times rapidly

The letter + show up after you press the star catch (*) two times rapidly

Instructions to enter open code on Samsung J600

Open Code is entered as: #0149*UNFREEZE# or #0111*UNLOCK#

Step by step instructions to enter open code on Samsung SGH-P207

Reset to unique processing plant setting by writing *2767*3855#, your telephone will reboot

Embed a non-acknowledged Sim Card and turn ON your telephone

A Wrong Sim message will show up

Enter * #9998*3323#

Exit white screen show up, tap the privilege delicate key, (periodically it won't go to the following screen, if so press the down key)

A menu will shows up, look down to the malloc Fail choice, this will reboot, and typical administration screen will show up

Enter *0141# and press the green Call key

Customized screen show up, the name of the current Sim Card supplier will show up on the screen

Turn telephone OFF, and afterward play Judas on

Go to menu by tapping left delicate key

Settings is in base right hand corner

Select alternative 7 = Security

Select alternative 6 = Sim Lock

Select alternative 1 = Disable

Enter 00000000 (eight zeros), the message will come up Sim lock incapacitated with a check stamp; your telephone is presently unlocke to utilized with different bearers.

Instructions to enter open code on Samsung SGH-T609

Turn ON your telephone without Sim Card

Sort #011*CODE#

Gadget ought to say: "System Lock Deactivated"

Telephone may consequently reboot

Step by step instructions to enter open code on Samsung Models: Z320i, Z510, Z650i

Embed a non-acknowledged Sim Card and turn ON your telephone

Sort **CODE# (CODE is the Unlock Code we sent you)

HTC Desire 700 Mic Solution Jumper Problem Ways Microphone

HTC Desire 700 Mic problem can be solve in a few steps as given in this post.How we can find Mic fault into a cellphone is very easy way.when ever our voice can not reach to destination monbile phone or we can not recored our own voice in voice recorder of cell phone it means it Mic not working.If a HTC Desire 700 Mic is not working then Mic problem can be solve in given bellow steps that are provided in diagram bellow.
[caption id="attachment_18945" align="alignnone" width="300"] HTC Desire 700 Mic Solution Jumper Problem Ways Microphone[/caption]
First step is open mobile and check HTC Desire 700 Mic points on borad if there is a good value in it then change Mic with new one.Problem will be solve. if only mic points do not show value then chek all mic track and parts that are used in mic function in HTC Desire 700.all mic parts and track are given in bellow diagram check all these parts and components and if necesory resold or change them.this will help you in HTC Desire 700 Mic Solution Jumper Problem Ways Microphone

For more information and new tips and tricks about this problem solution keep visiting this page we will update it if there will be new updates.some related post are also given below you can read more about mobile phone.

Please note that although every diagram & solution posted on our website has been tested by one or more members of our team before posting,so we will not be responsible for any loss or damage, including personal injury.Use this repair solutions at your own risk.

HTC Desire 700,Nokia,Mic,microphone,Solution,Jumper,Problem,Ways

HTC Desire 700 Mic Solution Jumper Problem Ways Mic Not Working Microphone

HTC Desire 700,Nokia,Mic,Microphone,Mic Problem,Mic Solution,Mic Jumpers,Mic Ways

HTC Desire 700 Usb Charging Problem Solution Jumper Ways

Problem:-
HTC Desire 700 usb charging solution,
HTC Desire 700 usb not recognised not detected
[caption id="attachment_18942" align="alignnone" width="300"] HTC Desire 700 Usb Charging Problem Solution Jumper Ways[/caption]
Diagnostics:-
Plug in usb cable into PC and Phone jack, Read notifications on the screen phone recognised or not. Check out you can save data to memory card or not. Replace usb data cable and try again.

Replace Usb charger and try again can it charge or not.

Solution:-
If you are facing charging problem in HTC Desire 700 and have test all above steps to solve this problem in it. Dis assemble the phone and then look at phone for water and carbon damages. Make it clean with electronics cleaner and apply heat with heat gun to make it dry.

Keep in mind heat should not be more and much because it can harm your skin and damage the mother board. So keep it in normal flow and look at the parts carefully.

Track all these paths and components as shown in diagram above. all these tracks are given in different colors so that you can find out the jumper ways easily.

HTC Desire 700,Usb,Charging,Problem,Solution,Jumper,Ways

HTC Desire 700, usb not charging, Usb not recognized, charging not save, not charging

HTC Desire 700 Ringer Solution Jumper Problem Ways

Ringer problem in HTC Desire 700 can be cause of no Ringtones Voice and also no loud speaker calls.if ringer is not working then we can not use loudspeaker and we can not play music.in cause of damage ringer ringtones volume can be low also.For solving HTC Desire 700 Ringer Solution Jumper Problem Ways use diagram below.
[caption id="attachment_18939" align="alignnone" width="300"] HTC Desire 700 Ringer Solution Jumper Problem Ways[/caption]
If there is any water damge or rust on mother board then clean it with electronic cleaner hot air for a few mint so that it can be dry.

check ringers point after opening the mobile.if ringers point is not working and its value is not right then replace it with new ringer.problem will be solved.if problem will not be solve then check ringers point on board.If there value is not right then check parts and components with there path from above diagram.If some path is missing then apply jumper.If any part and components is not working replace it with new one.

HTC Desire 700,Nokia,Ringer,Solution,Jumper,Problem,Ways

HTC Desire 700 Ringer Solution Jumper Problem Ways Ringer Not Working

HTC Desire 700,Nokia Ringer,Ringer Problem,Ringer Solution,Ringer Jumpers,Ringer Ways

HTC Desire 700 Speaker Solution Jumper Problem Ways Earpeace

if we have a speaker problem in HTC Desire 700 we will not be able to hear voice of call.we can temporary solve this issu by using Loud Speaker but to fix this problem we have to do a few basic diagnostics and steps to solve HTC Desire 700 Speaker Solution Jumper Problem Ways Earpeace.
[caption id="attachment_18937" align="alignnone" width="300"] HTC Desire 700 Speaker Solution Jumper Problem Ways Earpeace[/caption]
Open Mobile and check speaker points with a meter if they do not show continuty then speaker is dead and if they show a good value chak speaker attachement prints on board do they have value also then change speaker with new one.if speaker changing can not solve this issue check all these parts and track that used in speaker function in HTC Desire 700.

All parts components and tracks can be found in diagram above so check these components and also clean near by area of these parts.dry it with hot air and ceck all tracks with meter if missing apply jumpers and you may can change resold or replace these parts one by one till you solve HTC Desire 700 Speaker Solution Jumper Problem Ways Earpeace

For more information and new tips and tricks about this problem solution keep visiting this page we will update it if there will be new updates.some related post are also given below you can read more about mobile phone.

Please note that although every diagram & solution posted on our website has been tested by one or more members of our team before posting,so we will not be responsible for any loss or damage, including personal injury.Use this repair solutions at your own risk.

HTC Desire 700,Nokia,Speaker ,Earpeace,Solution,Jumper,Problem,Ways

HTC Desire 700 Speaker Solution Jumper Problem Ways Speaker Not Working Earpeace

HTC Desire 700,Nokia,Speaker,Earpeace,Speaker Problem,Speaker Solution,Speaker Jumpers,Speaker Ways

HTC Desire 700 Voluem Up Down Keys Not Working Problem Solution Jumpers

Problem:-
1-

HTC Desire 700 Volume Up Key is Not Working

2-

HTC Desire 700 Volume Down Key is Not Working

Tools:-
1-Hot Air is required.
2-Solding iron is required.
3-Skrue driver keys.
4-Electronics cleaner.
5-Four leg On of Switch ( Volume Key Switch ).
6-old board of HTC Desire 700 if a few parts are damage in this board.So that they can be replaced.


Solution:-
If Volume Up or Down key is not working in HTC Desire 700 then it can be the cause of Volume Switch or Resistance near by it.
So disassemble mobile phone and check whole mother board.
If there is some rust or carbon clean it with electronics cleaner and apply some heat so that it can be dry.
Check these tracks as shown in red and green lines in above diagram.
If some prints are missing or a few parts are damage apply jumpers or replace damaged parts.
If Volume Switch is damage or broken then replace it with new one.
Warnings:
Do not apply much heat it can be harm for your skin and mobile phone.
Try that board get fully dry.
When you are removing old volume switch make sure you will not damage prints from mother board so remove it when solding iron is too much hot.Or remove it with hot air.

Volume Button, Volume Keys

HTC Desire 700 Battery Connector Terminal Jumper Ways

Problem:-

HTC Desire 700 Dead Solution

HTC Desire 700 Battery Track Ways

HTC Desire 700 Battery Connector Jumper

HTC Desire 700 Terminal Jumper Ways

Diagnostics:-

If HTC Desire 700 is not getting power ON, Replace the battery and try to power it ON. Plug in charging pin into jack and try to make it charge. Check batter terminal's +v and -V points with electronics meter.

Solution:-

Dis assemble the phone HTC Desire 700 and check battery connectors if these are lose or not fix. Then check the whole mother board for water and rust damages, Carbon or broken parts.

If find some rust or carbon make it clean with electronics cleaner and apply hot air with heat gun to make it dry.

Find out these parts that are identified in above diagram and make check for volts. If find some broken parts or tracks are missing then apply jumpers as given in above diagrams.

HTC Desire 700,Nokia,Battery Terminal,Battery Points,Battery Jack Problem,Battery Terminal Solution,Battery Terminal Jumpers,Battery Power Ways

HTC Desire 700X Battery Consume, Battery Terminal, Battery Terminal Jumpers, Battery Terminal Solution,Battery Connector , Battery Connector Jumpers, Battery Connector Solution,

today  we  are  going  to  show  you  how to  root  your  android phone  easy  ways  in a  few  minute.please  follow us

framarroot  and  kingroot  is  a  one  click  application that  roots  any  android  phone  and  device.without  any  computer  or  laptop.  framar root  and  kingroot is  courrently  supported  on  android  version  2.0.3 and  android  version  4.1.1 above  for  kingroot.this  is  easy  and  fasting  rooting solution  your  android  devices  .then  you  can easisly  used  any  tipes  of software  just  like  .country  network  unlocking .privecy  pssword  or  evry  types  of  rooting  systam.









Everybody with an Android phone has got into a dilemma of whether to root their phone or not to . While The advantages of rooting are many but a single mistake can make your device an instant paperweight . Rooting an Android phone helps unlocks the many restrictions and unleash the full performance of a phone . After all you’ve paid with your hard earned money and you need to experience the best out of your Android device . Since most manufacturers take a lot of time to release firmware updates on their android devices . You can use your rooted phone to enjoy custom roms with the latest version of android and many exciting features much before its is officially available on your phone .You can install the app in your android device and check out if it works  , The app wont brick your phone as it does not touch your kernel , nor flash anything .  

process  of  rooting  system  

step1=download  the  root  file  for  suitable  version  just like  1.1.1 /2,3.2 etc  
step 2=copy  the  root  file  from  your  computer  to  your  mobile  phone  
step3=install the  kingroot application on  your  device
step3=chose "superuser" and  install the superuser option  on the  opplication 
step4= Select any of the exploits that appears in the app and wait for some time.
step5=if  you see success superuser su binary instelled.you have  to  root your  device the  massege  your  device  succesfully  rooted.
step6=if  you see  felled  please  try  another  version  of  rooting file  and  search  on  google  you  can  found  related  models  of  root  file  .
  <script async src="//pagead2.googlesyndication.com/pagead/js/adsbygoogle.js"></script>
<!-- Responsive -->
<ins class="adsbygoogle"
     style="display:block"
     data-ad-client="ca-pub-7805013029725244"
     data-ad-slot="8173331016"
     data-ad-format="auto"></ins>
<script>
(adsbygoogle = window.adsbygoogle || []).push({});
</script>







if  you  need  any  types  of  root  file  please  clock  on  the  link http://kingroot.en.uptodown.com/android.please  subscribe.

Samsung Galaxy Tab 3 T111 Home Key Not Working Solution.

This solution is about home key problem in Samsung Galaxy Tab 3 T111 in most cases this problem happens because of water or rust damages. So disassemble the phone and check these parts that are shown in the diagram given bellow.



On you have make sure there is rust or carbon on the motherboard so make it clean with electronics cleaner and apply heat to make it dry.

In the diagram above you can see red and green line track that is given to show you the track and parts used in Samsung Galaxy Tab 3 T111 home key functions.

Samsung Galaxy Tab 3 T111, Home Key Not Working, Home Key Problem, Home Key Solution

Samsung Galaxy Tab 3 T111 Touch screen Not Working Problem Solution Jumper Ways

Samsung Galaxy Tab 3 T111 Touch Screen Connector Problem Jumper Solution Ways

Problem:-
Samsung Galaxy Tab 3 T111 touch screen not working, Samsung Galaxy Tab 3 T111 touch is missing from some positions, Samsung Galaxy Tab 3 T111 touch screen jumper ways.

Diagnostics:-
Check touch screen of Samsung Galaxy Tab 3 T111, is it working, not working, or missing for some points. Make a screen test if possible and then try celebration if possible.

If you are looking for and having trouble finding where to put a bridge if the pin connector and touch screen is gone or terminated due to water damaged Samsung Galaxy Tab 3 T1110 in the water. This solution may help relieve your hard to find out where solder a jumper wire in it just to fix a problem touch screen not working.

This solution shows exactly the ways of the connecting pin connector touch screen design PCB Samsung Galaxy Tab 3 T111. You may just need to check the corresponding output pins cut if the connection already or have a circuit open, then solder a bridge over it, since it's only options.

Samsung Galaxy Tab 3 T111,Nokia,Touch Screen, Touch Problem, Touch Solution,Touch Screen Ways,Touch Screen Jumpers

Samsung Galaxy Tab 3 T111 Ringer Solution Jumper Problem Ways

Ringer problem in Samsung Galaxy Tab 3 T111 can be cause of no Ringtones Voice and also no loud speaker calls.if ringer is not working then we can not use loudspeaker and we can not play music.in cause of damage ringer ringtones volume can be low also.For solving Samsung Galaxy Tab 3 T111 Ringer Solution Jumper Problem Ways use daigram below.

If there is any water damge or rust on mother board then clean it with electronic cleaner hot air for a few mint so that it can be dry.

check ringers point after opening the mobile.if ringers point is not working and its value is not right then replace it with new ringer.problem will be solved.if problem will not be solve then check ringers point on board.If there value is not right then check parts and components with there path from above diagram.If some path is missing then apply jumper.If any part and components is not working replace it with new one.

Samsung Galaxy Tab 3 T111,Nokia,Ringer,Solution,Jumper,Problem,Ways

Samsung Galaxy Tab 3 T111 Ringer Solution Jumper Problem Ways Ringer Not Working

Samsung Galaxy Tab 3 T111,Nokia Ringer,Ringer Problem,Ringer Solution,Ringer Jumpers,Ringer Ways

Samsung Galaxy Tab 3 T111 Mic Solution Jumper Problem Ways Microphone

Samsung Galaxy Tab 3 T111 Mic problem can be solve in a few steps as given in this post.How we can find Mic fault into a cellphone is very easy way.when ever our voice can not reach to destination monbile phone or we can not recored our own voice in voice recorder of cell phone it means it Mic not working.If a Samsung Galaxy Tab 3 T111 Mic is not working then Mic problem can be solve in given bellow steps that are provided in diagram bellow.

First step is open mobile and check Samsung Galaxy Tab 3 T111 Mic points on borad if there is a good value in it then change Mic with new one.Problem will be solve. if only mic points do not show value then chek all mic track and parts that are used in mic function in Samsung Galaxy Tab 3 T111.all mic parts and track are given in bellow diagram check all these parts and components and if necesory resold or change them.this will help you in Samsung Galaxy Tab 3 T111 Mic Solution Jumper Problem Ways Microphone

For more information and new tips and tricks about this problem solution keep visiting this page we will update it if there will be new updates.some related post are also given below you can read more about mobile phone.

Please note that although every diagram & solution posted on our website has been tested by one or more members of our team before posting,so we will not be responsible for any loss or damage, including personal injury.Use this repair solutions at your own risk.

Samsung Galaxy Tab 3 T111,Nokia,Mic,microphone,Solution,Jumper,Problem,Ways

Samsung Galaxy Tab 3 T111 Mic Solution Jumper Problem Ways Mic Not Working Microphone

Samsung Galaxy Tab 3 T111,Nokia,Mic,Microphone,Mic Problem,Mic Solution,Mic Jumpers,Mic Ways

Samsung Galaxy Tab 3 T111 Usb Charging Problem Solution Jumper Ways

Problem:-
Samsung Galaxy Tab 3 T111 usb charging solution,
Samsung Galaxy Tab 3 T111 usb not recognised not detected

Diagnostics:-
Plug in usb cable into PC and Phone jack, Read notifications on the screen phone recognised or not. Check out you can save data to memory card or not. Replace usb data cable and try again.

Replace Usb charger and try again can it charge or not.

Solution:-
If you are facing charging problem in Samsung Galaxy Tab 3 T111 and have test all above steps to solve this problem in it. Dis assemble the phone and then look at phone for water and carbon damages. Make it clean with electronics cleaner and apply heat with heat gun to make it dry.

Keep in mind heat should not be more and much because it can harm your skin and damage the mother board. So keep it in normal flow and look at the parts carefully.

Track all these paths and components as shown in diagram above. all these tracks are given in different colors so that you can find out the jumper ways easily.

Samsung Galaxy Tab 3 T111,Usb,Charging,Problem,Solution,Jumper,Ways

usb not charging, Usb not recognized, charging not save, not charging

Samsung Galaxy Tab 3 T111 Speaker Solution Jumper Problem Ways Earpeace

if we have a speaker problem in Samsung Galaxy Tab 3 T111 we will not be able to hear voice of call.we can temporary solve this issu by using Loud Speaker but to fix this problem we have to do a few basic diagnostics and steps to solve Samsung Galaxy Tab 3 T111 Speaker Solution Jumper Problem Ways Earpeace.

Open Mobile and check speaker points with a meter if they do not show continuty then speaker is dead and if they show a good value chak speaker attachement prints on board do they have value also then change speaker with new one.if speaker changing can not solve this issue check all these parts and track that used in speaker function in Samsung Galaxy Tab 3 T111.

All parts components and tracks can be found in diagram above so check these components and also clean near by area of these parts.dry it with hot air and ceck all tracks with meter if missing apply jumpers and you may can change resold or replace these parts one by one till you solve Samsung Galaxy Tab 3 T111 Speaker Solution Jumper Problem Ways Earpeace

For more information and new tips and tricks about this problem solution keep visiting this page we will update it if there will be new updates.some related post are also given below you can read more about mobile phone.

Please note that although every diagram & solution posted on our website has been tested by one or more members of our team before posting,so we will not be responsible for any loss or damage, including personal injury.Use this repair solutions at your own risk.

Samsung Galaxy Tab 3 T111,Nokia,Speaker ,Earpeace,Solution,Jumper,Problem,Ways

Samsung Galaxy Tab 3 T111 Speaker Solution Jumper Problem Ways Speaker Not Working Earpeace

Samsung Galaxy Tab 3 T111,Nokia,Speaker,Earpeace,Speaker Problem,Speaker Solution,Speaker Jumpers,Speaker Ways

Samsung Galaxy Tab 3 T111 Power On Off Button Ways

Here is the solution for Samsung Galaxy Tab 3 T111 key not work on / off problem. This solution may help fix if the phone shows charging indication or charging icon when the battery charger is plug-in, but could not or can not turn it on.

Samsung Galaxy Tab 3 T111 Power On Off Key Jumper, Track, Ways
Samsung Galaxy Tab 3 T111 On



Samsung Galaxy Tab 3 T111 In the power ON-OFF, other than it is in the matrix keyboard flex is also connected to the keyboard filter IC. The solution below shows the connection line paths of the power key, this is useful without changing the filter IC and this can be used without having to connect the power key filter IC.

Just refer to the solution given below and track said main power line roads.

Only manage to apply a jumper wire in places where the Samsung Galaxy Tab 3 T111 connecting said power key. This can help change without compromising the IC filter matrix or keyboard flex.

Samsung Galaxy Tab 3 T111,Nokia,Power Button,Power Key,Power Switch,On Off Button, On Off Switch, Powerr Problem

Samsung Galaxy Tab 3 T111 Voluem Up Down Keys Not Working Problem Solution Jumpers

Problem:-
1-

Samsung Galaxy Tab 3 T111 Volume Up Key is Not Working

2-

Samsung Galaxy Tab 3 T111 Volume Down Key is Not Working

Tools:-
1-Hot Air is required.
2-Solding iron is required.
3-Skrue driver keys.
4-Electronics cleaner.
5-Four leg On of Switch ( Volume Key Switch ).
6-old board of Samsung Galaxy Tab 3 T111 if a few parts are damage in this board.So that they can be replaced.


Solution:-
If Volume Up or Down key is not working in Samsung Galaxy Tab 3 T111 then it can be the cause of Volume Switch or Resistance near by it.
So disassemble mobile phone and check whole mother board.
If there is some rust or carbon clean it with electronics cleaner and apply some heat so that it can be dry.
Check these tracks as shown in red and green lines in above diagram.
If some prints are missing or a few parts are damage apply jumpers or replace damaged parts.
If Volume Switch is damage or broken then replace it with new one.
Warnings:
Do not apply much heat it can be harm for your skin and mobile phone.
Try that board get fully dry.
When you are removing old volume switch make sure you will not damage prints from mother board so remove it when solding iron is too much hot.Or remove it with hot air.

Samsung Galaxy Tab 3 T111 Memory Card Not Working Problem
Problem:-

Samsung Galaxy Tab 3 T111 Memory Card Problem,

Samsung Galaxy Tab 3 T111 Memory Card Not Working,
Insert Memory Card, Memory Card Error, Memory Card Not Formatted

Diagnostics:-
Make sure memory card is not damage and broken,
Check Memory Card MMC jack it should not be damage and break,
Replace MMC and check old in Computer is it working OK.


Solution:-
If you have check above repairing steps and can not solve the memory card problem in Samsung Galaxy Tab 3 T111. Then Open mobile phone and after dis assemble of Samsung Galaxy Tab 3 T111 check these jumper points that are given in above diagram in different colours.

If these points are not showing volt then apply jumpers and then check Samsung Galaxy Tab 3 T111 for memory card.

Check mother board for water and rust damages clean the mother board for carbon and apply heat to make it dry.

Samsung Galaxy Tab 3 T111,Nokia,MMC Problem,MMC Solution, Memory Card Jumpers,Memory Card Ways,Memory card Problems

Microsoft Lumia 550 Insert Sim IC Solution Jumper Problem Ways

in case of insert sim problem in Microsoft Lumia 550 it will show insert sim, sim not valid, and may not show signal.to solve Microsoft Lumia 550 Insert Sim IC Solution Jumper Problem Ways we have to do a few simple steps as given in this post.in first step replace you sim and try it.scratch sim points in mobile slightly then try.

after dis assembly check all sim jack points at mother board with meter.check all these parts and track that are given in above diagram and if any of them is missing apply jumpers to make that path in good condition.if any of the components is missing replace it with new.

you can change sim ic also and may can apply jumpers after removing ic from mother board.there are some posts also to describe that how to make jumpers in sim ic to solve insert sim problem.

For more information and new tips and tricks about this problem solution keep visiting this page we will update it if there will be new updates.some related post are also given below you can read more about mobile phone.

Please note that although every diagram & solution posted on our website has been tested by one or more members of our team before posting,so we will not be responsible for any loss or damage, including personal injury.Use this repair solutions at your own risk.

Microsoft Lumia 550,Nokia,Insert Sim,Sim,Solution,Jumper,Problem,Ways

Microsoft Lumia 550 Insert Sim IC Solution Jumper Problem Ways Sim Not Working Sim Not Valid

Microsoft Lumia 550,Nokia,Insert Sim,Sim,Insert Sim Problem,Insert Sim Solution,Insert Sim Jumpers,Insert Sim Ways

Problem:-

LG G3 D855 Memory Card Problem,

LG G3 D855 Memory Card Not Working,
Insert Memory Card, Memory Card Error, Memory Card Not Formatted

Diagnostics:-
Make sure memory card is not damage and broken,
Check Memory Card MMC jack it should not be damage and break,
Replace MMC and check old in Computer is it working OK.


Solution:-
If you have check above repairing steps and can not solve the memory card problem in LG G3 D855. Then Open mobile phone and after dis assemble of LG G3 D855 check these jumper points that are given in above diagram in different colours.

If these points are not showing volt then apply jumpers and then check LG G3 D855 for memory card.

Check mother board for water and rust damages clean the mother board for carbon and apply heat to make it dry.

LG G3 D855,Nokia,MMC Problem,MMC Solution, Memory Card Jumpers,Memory Card Ways,Memory card Problems

LG G3 D855 Insert Sim IC Solution Jumper Problem Ways

in case of insert sim problem in LG G3 D855 it will show insert sim, sim not valid, and may not show signal.to solve LG G3 D855 Insert Sim IC Solution Jumper Problem Ways we have to do a few simple steps as given in this post.in first step replace you sim and try it.scratch sim points in mobile slightly then try.

after dis assembly check all sim jack points at mother board with meter.check all these parts and track that are given in above diagram and if any of them is missing apply jumpers to make that path in good condition.if any of the components is missing replace it with new.

you can change sim ic also and may can apply jumpers after removing ic from mother board.there are some posts also to describe that how to make jumpers in sim ic to solve insert sim problem.

For more information and new tips and tricks about this problem solution keep visiting this page we will update it if there will be new updates.some related post are also given below you can read more about mobile phone.

Please note that although every diagram & solution posted on our website has been tested by one or more members of our team before posting,so we will not be responsible for any loss or damage, including personal injury.Use this repair solutions at your own risk.

LG G3 D855,Nokia,Insert Sim,Sim,Solution,Jumper,Problem,Ways

LG G3 D855 Insert Sim IC Solution Jumper Problem Ways Sim Not Working Sim Not Valid

LG G3 D855,Nokia,Insert Sim,Sim,Insert Sim Problem,Insert Sim Solution,Insert Sim Jumpers,Insert Sim Ways

LG G3 D855 Voluem Up Down Keys Not Working Problem Solution Jumpers

Problem:-
1-

LG G3 D855 Volume Up Key is Not Working

2-

LG G3 D855 Volume Down Key is Not Working

Tools:-
1-Hot Air is required.
2-Solding iron is required.
3-Skrue driver keys.
4-Electronics cleaner.
5-Four leg On of Switch ( Volume Key Switch ).
6-old board of LG G3 D855 if a few parts are damage in this board.So that they can be replaced.


Solution:-
If Volume Up or Down key is not working in LG G3 D855 then it can be the cause of Volume Switch or Resistance near by it.
So disassemble mobile phone and check whole mother board.
If there is some rust or carbon clean it with electronics cleaner and apply some heat so that it can be dry.
Check these tracks as shown in red and green lines in above diagram.
If some prints are missing or a few parts are damage apply jumpers or replace damaged parts.
If Volume Switch is damage or broken then replace it with new one.
Warnings:
Do not apply much heat it can be harm for your skin and mobile phone.
Try that board get fully dry.
When you are removing old volume switch make sure you will not damage prints from mother board so remove it when solding iron is too much hot.Or remove it with hot air.

LG G3 D855 Power On Off Key Button Switch Jumper Ways

LG G3 D855 charging ok, flash ok, but not powering phone, this mean power button cut/line problem.So now follow simple power button jumper ways.

If you are facing an energy problem in LG G3 D855 diagrams in this article can help. Continue with the following troubleshooting solutions and establish bridges necessary for the points that have been damaged.

LG G3 D855 Dead does not start Solution

LG G3 D855 keys Power Jumper

LG G3 D855 On Off Button Ways

LG G3 D855 power button point Trick damaged bridge. Trace point of damage to the meter or check off switch with a new one. We can check problem button to connect the phone to the charger with mobile entertainment indicator appears on the screen and pressing the power button, then this is a power button problem. See diagram and apply jumpers as diagram.

LG G3 D855 Ringer Solution Jumper Problem Ways

Ringer problem in LG G3 D855 can be cause of no Ringtones Voice and also no loud speaker calls.if ringer is not working then we can not use loudspeaker and we can not play music.in cause of damage ringer ringtones volume can be low also.For solving LG G3 D855 Ringer Solution Jumper Problem Ways use daigram below.

If there is any water damge or rust on mother board then clean it with electronic cleaner hot air for a few mint so that it can be dry.

check ringers point after opening the mobile.if ringers point is not working and its value is not right then replace it with new ringer.problem will be solved.if problem will not be solve then check ringers point on board.If there value is not right then check parts and components with there path from above diagram.If some path is missing then apply jumper.If any part and components is not working replace it with new one.

LG G3 D855,Nokia,Ringer,Solution,Jumper,Problem,Ways

LG G3 D855 Ringer Solution Jumper Problem Ways Ringer Not Working

LG G3 D855,Nokia Ringer,Ringer Problem,Ringer Solution,Ringer Jumpers,Ringer Ways

LG G3 D855 Mic Solution Jumper Problem Ways Microphone

LG G3 D855 Mic problem can be solve in a few steps as given in this post.How we can find Mic fault into a cellphone is very easy way.when ever our voice can not reach to destination monbile phone or we can not recored our own voice in voice recorder of cell phone it means it Mic not working.If a LG G3 D855 Mic is not working then Mic problem can be solve in given bellow steps that are provided in diagram bellow.

First step is open mobile and check LG G3 D855 Mic points on borad if there is a good value in it then change Mic with new one.Problem will be solve. if only mic points do not show value then chek all mic track and parts that are used in mic function in LG G3 D855.all mic parts and track are given in bellow diagram check all these parts and components and if necesory resold or change them.this will help you in LG G3 D855 Mic Solution Jumper Problem Ways Microphone

For more information and new tips and tricks about this problem solution keep visiting this page we will update it if there will be new updates.some related post are also given below you can read more about mobile phone.

Please note that although every diagram & solution posted on our website has been tested by one or more members of our team before posting,so we will not be responsible for any loss or damage, including personal injury.Use this repair solutions at your own risk.

LG G3 D855,Nokia,Mic,microphone,Solution,Jumper,Problem,Ways

LG G3 D855 Mic Solution Jumper Problem Ways Mic Not Working Microphone

LG G3 D855,Nokia,Mic,Microphone,Mic Problem,Mic Solution,Mic Jumpers,Mic Ways

LG G3 D855 Usb Charging Problem Solution Jumper Ways

Problem:-
LG G3 D855 usb charging solution,
LG G3 D855 usb not recognised not detected

Diagnostics:-
Plug in usb cable into PC and Phone jack, Read notifications on the screen phone recognised or not. Check out you can save data to memory card or not. Replace usb data cable and try again.

Replace Usb charger and try again can it charge or not.

Solution:-
If you are facing charging problem in LG G3 D855 and have test all above steps to solve this problem in it. Dis assemble the phone and then look at phone for water and carbon damages. Make it clean with electronics cleaner and apply heat with heat gun to make it dry.

Keep in mind heat should not be more and much because it can harm your skin and damage the mother board. So keep it in normal flow and look at the parts carefully.

Track all these paths and components as shown in diagram above. all these tracks are given in different colors so that you can find out the jumper ways easily.

LG G3 D855,Usb,Charging,Problem,Solution,Jumper,Ways

usb not charging, Usb not recognized, charging not save, not charging

LG G3 D855 Battery Connector Terminal Jumper Ways

Problem:-

LG G3 D855 Dead Solution

LG G3 D855 Battery Track Ways

LG G3 D855 Battery Connector Jumper

LG G3 D855 Terminal Jumper Ways

Diagnostics:-

If LG G3 D855 is not getting power ON, Replace the battery and try to power it ON. Plug in charging pin into jack and try to make it charge. Check batter terminal's +v and -V points with electronics meter.

Solution:-

Dis assemble the phone LG G3 D855 and check battery connectors if these are lose or not fix. Then check the whole mother board for water and rust damages, Carbon or broken parts.

If find some rust or carbon make it clean with electronics cleaner and apply hot air with heat gun to make it dry.

Find out these parts that are identified in above diagram and make check for volts. If find some broken parts or tracks are missing then apply jumpers as given in above diagrams.

LG G3 D855,Nokia,Battery Terminal,Battery Points,Battery Jack Problem,Battery Terminal Solution,Battery Terminal Jumpers,Battery Power Ways

LG G3 D855, Battery Consume, Battery Terminal, Battery Terminal Jumpers, Battery Terminal Solution,Battery Connector , Battery Connector Jumpers, Battery Connector Solution,

LG G3 D855 Touch screen Not Working Problem Solution Jumper Ways

LG G3 D855 Touch Screen Connector Problem Jumper Solution Ways

Problem:-
LG G3 D855 touch screen not working, LG G3 D855 touch is missing from some positions, LG G3 D855 touch screen jumper ways.

Diagnostics:-
Check touch screen of LG G3 D855, is it working, not working, or missing for some points. Make a screen test if possible and then try celebration if possible.

If you are looking for and having trouble finding where to put a bridge if the pin connector and touch screen is gone or terminated due to water damaged LG G3 D8550 in the water. This solution may help relieve your hard to find out where solder a jumper wire in it just to fix a problem touch screen not working.

This solution shows exactly the ways of the connecting pin connector touch screen design PCB LG G3 D855. You may just need to check the corresponding output pins cut if the connection already or have a circuit open, then solder a bridge over it, since it's only options.

LG G3 D855,Nokia,Touch Screen, Touch Problem, Touch Solution,Touch Screen Ways,Touch Screen Jumpers

LG G3 D855 LCD Display IC Solution Jumper Problem Ways

if you have LCD display problem in LG G3 D855 it will not show any thing on display screen.it can be blanck no light or dim display also.LG G3 D855 LCD Display IC Solution Jumper Problem Ways can be solve with a few steps that are given in this post.Look at diagram bellow and folw instructions.

after dis assambling Mobile phone check whole board for rust carbon or water damages.clean lcd jack and mother board then apply hot air to dry it for a few mints.change lcd with new one if display is ok then fine else heck lcd jack prints value or remove it and replae with new.

else try all paths tracks and components and parts that are given in diagram above if any path is missing aplly jumpers and if parts are damaged change them.

For more information and new tips and tricks about this problem solution keep visiting this page we will update it if there will be new updates.some related post are also given below you can read more about mobile phone.

Please note that although every diagram & solution posted on our website has been tested by one or more members of our team before posting,so we will not be responsible for any loss or damage, including personal injury.Use this repair solutions at your own risk.

LG G3 D855,Nokia,LCD,Display,Solution,Jumper,Problem,Ways

LG G3 D855 LCD Display IC Solution Jumper Problem Ways LCD Display Not Working

LG G3 D855,Nokia,LCD Display,Display Problem,Display Solution,Display Jumpers,Display Ways,White Display ,Blinking Display,Blank Display

LG G3 D855 LCD Display Light IC Solution Jumper Problem Ways

if lcd light is not workin in LG G3 D855 then we will not be able to watch any text on display.light can be dim or may be blank.LG G3 D855 LCD Display Light IC Solution Jumper Problem Ways can be solve in a few steps as given in this post.

after dis assambling LG G3 D855 chek mother board if there is any carbon water damage or rust.clean whole board with electronics cleaner and then apply hot air for a few mints so that it can be dry.

replae led if it is a jack lcd and if it is pasted then after removing check its prints value.if value is ok then replae lcd and if alue is missing then check whole parts componenets as iven in above diagram.check all paths and if any tracks of them is missing apply jumpers.

it will help you to solve LG G3 D855 LCD Display Light IC Solution Jumper Problem Ways
easly.

For more information and new tips and tricks about this problem solution keep visiting this page we will update it if there will be new updates.some related post are also given below you can read more about mobile phone.

Please note that although every diagram & solution posted on our website has been tested by one or more members of our team before posting,so we will not be responsible for any loss or damage, including personal injury.Use this repair solutions at your own risk.

LG G3 D855,Nokia,LCD,Display,Solution,Jumper,Proble,Ways

LG G3 D855 LCD Display Light IC Solution Jumper Problem Ways LCD Display Light Not Working

LG G3 D855,Nokia,LCD Display Light,Display Light Problem,Display Light Solution,Display Light Jumpers,Display Light Ways,White Display ,Blinking Display,Blank Display,Keypad Light

Samsung Galaxy J1 Mic Solution Jumper Problem Ways Microphone

Samsung Galaxy J1 Mic problem can be solve in a few steps as given in this post.How we can find Mic fault into a cellphone is very easy way.when ever our voice can not reach to destination monbile phone or we can not recored our own voice in voice recorder of cell phone it means it Mic not working.If a Samsung Galaxy J1 Mic is not working then Mic problem can be solve in given bellow steps that are provided in diagram bellow.

First step is open mobile and check Samsung Galaxy J1 Mic points on borad if there is a good value in it then change Mic with new one.Problem will be solve. if only mic points do not show value then chek all mic track and parts that are used in mic function in Samsung Galaxy J1.all mic parts and track are given in bellow diagram check all these parts and components and if necesory resold or change them.this will help you in Samsung Galaxy J1 Mic Solution Jumper Problem Ways Microphone

For more information and new tips and tricks about this problem solution keep visiting this page we will update it if there will be new updates.some related post are also given below you can read more about mobile phone.

Please note that although every diagram & solution posted on our website has been tested by one or more members of our team before posting,so we will not be responsible for any loss or damage, including personal injury.Use this repair solutions at your own risk.

Samsung Galaxy J1,Nokia,Mic,microphone,Solution,Jumper,Problem,Ways

Samsung Galaxy J1 Mic Solution Jumper Problem Ways Mic Not Working Microphone

Samsung Galaxy J1,Nokia,Mic,Microphone,Mic Problem,Mic Solution,Mic Jumpers,Mic Ways

Samsung Galaxy A8 Power On Off Key Button Switch Jumper Ways

Samsung Galaxy A8 charging ok, flash ok, but not powering phone, this mean power button cut/line problem.So now follow simple power button jumper ways.

If you are facing an energy problem in Samsung Galaxy A8 diagrams in this article can help. Continue with the following troubleshooting solutions and establish bridges necessary for the points that have been damaged.

Samsung Galaxy A8 Dead does not start Solution

Samsung Galaxy A8 keys Power Jumper

Samsung Galaxy A8 On Off Button Ways

Samsung Galaxy A8 power button point Trick damaged bridge. Trace point of damage to the meter or check off switch with a new one. We can check problem button to connect the phone to the charger with mobile entertainment indicator appears on the screen and pressing the power button, then this is a power button problem. See diagram and apply jumpers as diagram.

iPhone 5 Battery Connector Terminal Jumper Ways

Problem:-

iPhone 5 Dead Solution

iPhone 5 Battery Track Ways

iPhone 5 Battery Connector Jumper

iPhone 5 Terminal Jumper Ways

Diagnostics:-

If iPhone 5 is not getting power ON, Replace the battery and try to power it ON. Plug in charging pin into jack and try to make it charge. Check batter terminal's +v and -V points with electronics meter.



Solution:-

Dis assemble the phone iPhone 5 and check battery connectors if these are lose or not fix. Then check the whole mother board for water and rust damages, Carbon or broken parts.

If find some rust or carbon make it clean with electronics cleaner and apply hot air with heat gun to make it dry.

Find out these parts that are identified in above diagram and make check for volts. If find some broken parts or tracks are missing then apply jumpers as given in above diagrams.

iPhone 5,Nokia,Battery Terminal,Battery Points,Battery Jack Problem,Battery Terminal Solution,Battery Terminal Jumpers,Battery Power Ways

iPhone 5X Battery Consume, Battery Terminal, Battery Terminal Jumpers, Battery Terminal Solution,Battery Connector , Battery Connector Jumpers, Battery Connector Solution,

iPhone 6s LCD Display Light IC Solution Jumper Problem Ways

if lcd light is not workin in iPhone 6s then we will not be able to watch any text on display.light can be dim or may be blank.iPhone 6s LCD Display Light IC Solution Jumper Problem Ways can be solve in a few steps as given in this post.

after dis assambling iPhone 6s chek mother board if there is any carbon water damage or rust.clean whole board with electronics cleaner and then apply hot air for a few mints so that it can be dry.

replae led if it is a jack lcd and if it is pasted then after removing check its prints value.if value is ok then replae lcd and if alue is missing then check whole parts componenets as iven in above diagram.check all paths and if any tracks of them is missing apply jumpers.

it will help you to solve iPhone 6s LCD Display Light IC Solution Jumper Problem Ways
easly.

For more information and new tips and tricks about this problem solution keep visiting this page we will update it if there will be new updates.some related post are also given below you can read more about mobile phone.

Please note that although every diagram & solution posted on our website has been tested by one or more members of our team before posting,so we will not be responsible for any loss or damage, including personal injury.Use this repair solutions at your own risk.

iPhone 6s,Nokia,LCD,Display,Solution,Jumper,Proble,Ways

iPhone 6s LCD Display Light IC Solution Jumper Problem Ways LCD Display Light Not Working

iPhone 6s,Nokia,LCD Display Light,Display Light Problem,Display Light Solution,Display Light Jumpers,Display Light Ways,White Display ,Blinking Display,Blank Display,Keypad Light

Sony Xperia T2 Ultra D5303 Battery Connector Terminal Jumper Ways

Problem:-

Sony Xperia T2 Ultra D5303 Dead Solution

Sony Xperia T2 Ultra D5303 Battery Track Ways

Sony Xperia T2 Ultra D5303 Battery Connector Jumper

Sony Xperia T2 Ultra D5303 Terminal Jumper Ways

Diagnostics:-

If Sony Xperia T2 Ultra D5303 is not getting power ON, Replace the battery and try to power it ON. Plug in charging pin into jack and try to make it charge. Check batter terminal's +v and -V points with electronics meter.



Solution:-

Dis assemble the phone Sony Xperia T2 Ultra D5303 and check battery connectors if these are lose or not fix. Then check the whole mother board for water and rust damages, Carbon or broken parts.

If find some rust or carbon make it clean with electronics cleaner and apply hot air with heat gun to make it dry.

Find out these parts that are identified in above diagram and make check for volts. If find some broken parts or tracks are missing then apply jumpers as given in above diagrams.

Sony Xperia T2 Ultra D5303,Nokia,Battery Terminal,Battery Points,Battery Jack Problem,Battery Terminal Solution,Battery Terminal Jumpers,Battery Power Ways

Sony Xperia T2 Ultra D5303, Battery Consume, Battery Terminal, Battery Terminal Jumpers, Battery Terminal Solution,Battery Connector , Battery Connector Jumpers, Battery Connector Solution,

Sony Xperia T2 Ultra D5303 Usb Charging Problem Solution Jumper Ways

Problem:-
Sony Xperia T2 Ultra D5303 usb charging solution,
Sony Xperia T2 Ultra D5303 usb not recognised not detected

Diagnostics:-
Plug in usb cable into PC and Phone jack, Read notifications on the screen phone recognised or not. Check out you can save data to memory card or not. Replace usb data cable and try again.

Replace Usb charger and try again can it charge or not.

Solution:-
If you are facing charging problem in Sony Xperia T2 Ultra D5303 and have test all above steps to solve this problem in it. Dis assemble the phone and then look at phone for water and carbon damages. Make it clean with electronics cleaner and apply heat with heat gun to make it dry.

Keep in mind heat should not be more and much because it can harm your skin and damage the mother board. So keep it in normal flow and look at the parts carefully.

Track all these paths and components as shown in diagram above. all these tracks are given in different colors so that you can find out the jumper ways easily.

Sony Xperia T2 Ultra D5303,Usb,Charging,Problem,Solution,Jumper,Ways

usb not charging, Usb not recognized, charging not save, not charging

samsung galexcy s6 edge charging  problems  solution

if you  have charging  problems on  your  device  .at  first  completly  check  your dada  cable  or  usb data  cable  .You can fix the issue manually as there are several ways to tackle the slow charging problem. All the ways are discussed here.There are a lot of ways to fix slow charging issue on the Galaxy S6  edge .and  another  option  check  your charging  connector  on your  device .

how  to  solved   fake  charging   problems  ?

how  to  found  charging  ways  of  samsung galaxy  s6  agde

here  are  some  tips  on  how to  faster  increase  charging  persantage

1=use the  samsung original  charging  cable or  2 ampere  charger2=Leave it there plugged in for 30 Mins.3=Let it charge to 100%4=When the battery is fully charged. Remove the charger5=Let your S6 drains to 0%(Discharge) ( Do intensive CPU usage tasks, Playing games, streaming videos etc.)66=Repeat these step twice.7=The battery will subsequently receives it’s charging cycle.8=By performing this every 3 times in per 6 months will keep your battery in good standing9=do  not  use  any  other charging cable  ar  charger  just  like  low ampere