Samsung Galaxy S6 Edge Voluem Up Down Keys Not Working Problem Solution Jumpers

Samsung Galaxy S6 Edge Voluem Up Down Keys Not Working Problem Solution Jumpers



Problem:-
1-

Samsung Galaxy S6 Edge Volume Up Key is Not Working


2-

Samsung Galaxy S6 Edge Volume Down Key is Not Working


Tools:-
1-Hot Air is required.
2-Solding iron is required.
3-Skrue driver keys.
4-Electronics cleaner.
5-Four leg On of Switch ( Volume Key Switch ).
6-old board of Samsung Galaxy S6 Edge if a few parts are damage in this board.So that they can be replaced.
[caption id="attachment_19236" align="alignnone" width="300"]Samsung Galaxy S6 Edge Voluem Up Down Keys Not Working Problem Solution Jumpers Samsung Galaxy S6 Edge Voluem Up Down Keys Not Working Problem Solution Jumpers[/caption]

Solution:-
If Volume Up or Down key is not working in Samsung Galaxy S6 Edge then it can be the cause of Volume Switch or Resistance near by it.
So disassemble mobile phone and check whole mother board.
If there is some rust or carbon clean it with electronics cleaner and apply some heat so that it can be dry.
Check these tracks as shown in red and green lines in above diagram.
If some prints are missing or a few parts are damage apply jumpers or replace damaged parts.
If Volume Switch is damage or broken then replace it with new one.
Warnings:
Do not apply much heat it can be harm for your skin and mobile phone.
Try that board get fully dry.
When you are removing old volume switch make sure you will not damage prints from mother board so remove it when solding iron is too much hot.Or remove it with hot air.

Volume Button, Volume Keys, Volume Up, Volume Down

Samsung I9300 Galaxy S III LCD Display Light Solution Jumper Ways

Samsung I9300 Galaxy S III LCD Display Light IC Solution Jumper Problem Ways



if lcd light is not workin in Samsung I9300 Galaxy S III then we will not be able to watch any text on display.light can be dim or may be blank.Samsung I9300 Galaxy S III LCD Display Light IC Solution Jumper Problem Ways can be solve in a few steps as given in this post.
[caption id="attachment_19232" align="alignnone" width="300"]Samsung I9300 Galaxy S III LCD Display Light IC Solution Jumper Problem Ways Samsung I9300 Galaxy S III LCD Display Light IC Solution Jumper Problem Ways[/caption]
after dis assambling Samsung I9300 Galaxy S III chek mother board if there is any carbon water damage or rust.clean whole board with electronics cleaner and then apply hot air for a few mints so that it can be dry.

replae led if it is a jack lcd and if it is pasted then after removing check its prints value.if value is ok then replae lcd and if alue is missing then check whole parts componenets as iven in above diagram.check all paths and if any tracks of them is missing apply jumpers.

it will help you to solve Samsung I9300 Galaxy S III LCD Display Light IC Solution Jumper Problem Ways
easly.

For more information and new tips and tricks about this problem solution keep visiting this page we will update it if there will be new updates.some related post are also given below you can read more about mobile phone.

Please note that although every diagram & solution posted on our website has been tested by one or more members of our team before posting,so we will not be responsible for any loss or damage, including personal injury.Use this repair solutions at your own risk.


Samsung I9300 Galaxy S III,Nokia,LCD,Display,Solution,Jumper,Proble,Ways



Samsung I9300 Galaxy S III LCD Display Light IC Solution Jumper Problem Ways LCD Display Light Not Working



Samsung I9300 Galaxy S III,Nokia,LCD Display Light,Display Light Problem,Display Light Solution,Display Light Jumpers,Display Light Ways,White Display ,Blinking Display,Blank Display,Keypad Light

Samsung Galaxy Core Touch screen Not Working Problem Solution Jumper Ways

Samsung Galaxy Core Touch screen Not Working Problem Solution Jumper Ways



Samsung Galaxy Core Touch Screen Connector Problem Jumper Solution Ways



Problem:-
Samsung Galaxy Core touch screen not working, Samsung Galaxy Core touch is missing from some positions, Samsung Galaxy Core touch screen jumper ways.
[caption id="attachment_19229" align="alignnone" width="300"]Samsung Galaxy Core Touch screen Not Working Problem Solution Jumper Ways Samsung Galaxy Core Touch screen Not Working Problem Solution Jumper Ways[/caption]
Diagnostics:-
Check touch screen of Samsung Galaxy Core, is it working, not working, or missing for some points. Make a screen test if possible and then try celebration if possible.

If you are looking for and having trouble finding where to put a bridge if the pin connector and touch screen is gone or terminated due to water damaged Samsung Galaxy Core0 in the water. This solution may help relieve your hard to find out where solder a jumper wire in it just to fix a problem touch screen not working.

This solution shows exactly the ways of the connecting pin connector touch screen design PCB Samsung Galaxy Core. You may just need to check the corresponding output pins cut if the connection already or have a circuit open, then solder a bridge over it, since it's only options.

Samsung Galaxy Core,Nokia,Touch Screen, Touch Problem, Touch Solution,Touch Screen Ways,Touch Screen Jumpers

Samsung Galaxy Alpha Usb Charging Problem Solution Jumper Ways

Samsung Galaxy Alpha Usb Charging Problem Solution Jumper Ways




Problem:-
Samsung Galaxy Alpha usb charging solution,
Samsung Galaxy Alpha usb not recognised not detected
samsung-galaxy-alpha-usb-charging-problem-solution-jumper-ways
Diagnostics:-
Plug in usb cable into PC and Phone jack, Read notifications on the screen phone recognised or not. Check out you can save data to memory card or not. Replace usb data cable and try again.

Replace Usb charger and try again can it charge or not.

Solution:-
If you are facing charging problem in Samsung Galaxy Alpha and have test all above steps to solve this problem in it. Dis assemble the phone and then look at phone for water and carbon damages. Make it clean with electronics cleaner and apply heat with heat gun to make it dry.

Keep in mind heat should not be more and much because it can harm your skin and damage the mother board. So keep it in normal flow and look at the parts carefully.

Track all these paths and components as shown in diagram above. all these tracks are given in different colors so that you can find out the jumper ways easily.

Samsung Galaxy Alpha,Usb,Charging,Problem,Solution,Jumper,Ways



Samsung Galaxy Alpha, usb not charging, Usb not recognized, charging not save, not charging

Samsung I9003 Galaxy SL Usb Charging Problem Solution Jumper Ways

Samsung I9003 Galaxy SL Usb Charging Problem Solution Jumper Ways




Problem:-
Samsung I9003 Galaxy SL usb charging solution,
Samsung I9003 Galaxy SL usb not recognised not detected
samsung-i9003-galaxy-sl-usb-charging-problem-solution-jumper-ways
Diagnostics:-
Plug in usb cable into PC and Phone jack, Read notifications on the screen phone recognised or not. Check out you can save data to memory card or not. Replace usb data cable and try again.

Replace Usb charger and try again can it charge or not.

Solution:-
If you are facing charging problem in Samsung I9003 Galaxy SL and have test all above steps to solve this problem in it. Dis assemble the phone and then look at phone for water and carbon damages. Make it clean with electronics cleaner and apply heat with heat gun to make it dry.

Keep in mind heat should not be more and much because it can harm your skin and damage the mother board. So keep it in normal flow and look at the parts carefully.

Track all these paths and components as shown in diagram above. all these tracks are given in different colors so that you can find out the jumper ways easily.

Samsung I9003 Galaxy SL,Usb,Charging,Problem,Solution,Jumper,Ways



Samsung I9003 Galaxy SL, usb not charging, Usb not recognized, charging not save, not charging

Z3X BOX Samsung Tool PRO V 26.9 Setup Download

Z3X BOX Samsung Tool PRO 26.9 Update. Some new phones. First world 

New phones:
Added:
- support SM-G570F (Flashing, Read/Write EFS, Reset FRP, reboot to download/recovery) - First World
- support SM-G570M (Flashing, Read/Write EFS, Reset FRP, reboot to download/recovery)
- support SM-G610F (Flashing, Read/Write EFS, Reset FRP, reboot to download/recovery)

- support SM-T377T (Flashing, Unlock, Read/Write EFS, Reset FRP, Repair, reboot to download/recovery, Reset MSL)

- support SM-G1600 (Flashing, Read/Write EFS, Read/Write QCN, Read/Write SEC, reboot to download/recovery)
- support SM-G6100 (Flashing, Read/Write EFS, Read/Write QCN, Read/Write SEC, reboot to download/recovery)
Setup Download
Changes:
As you know new firmware qualcomm phones need root for work AT RIL, so we made some changes:
- autodetect requed phone root for work AT RIL.

GB KEY v 1.78 Huawei V 1.22 Setup Download

HAPPY MUHARRAM FOR ALL COMMUNITY
GB-KEY VER 1.78 - HUAWEI GBKEY VER 1.22
RELEASED

****************
** WHAT'S NEW **
****************
GB-Key Version 1,78

- REMOVED USER/PASS Request in Config Tab
after many request from GBKEY Users, forgetting their User/pass, now no need Enter User/Pass to use GB-Key Sw

- Added Models to Supported list:

Doro 620
Doro 631
----------------
Blu Neo 4.5
----------------
Alcatel OT-7042
----------------
Huawei Y360

Direct Unlock / Reset Counters with USB Cable.

HUAWEI MODULE VER 1.22

- Added Unlock BootLoader code
Read Code / Write Code / Unlock with Code
Now users can do Direct Unlock of BOOTLOADER Code for Hisilicon/Qualcomm phones

- Lock Bootloader for HiSilicon is Supported

All operations with USB Cable, Added info HOW To Proceed on Screen.

Disclaimer: This Feature is released to repair original Imei of your phone... Changing of IMEI is illegal in some countries, and we will not be held responsible for any consequences that befall

Mandatory Use Latest version of SW.

Download From WEB

GBKEY Classical Module

Huawei Module ver

Alternative Links (Mediafire)

GBKEY Classical Module

Huawei Module ver

NEW OFFER FOR RESELLERS

200 GBKEYS At 50% Price

10 GBKEY FULL ACTIVATED : Pack1, Pack3, Pack4 at 550 eur

Minimum 10 Pcs to Get This Offer Price