Cell Phone Water Damage Repair Tips

Cell Phone Water Damage Repair Tips :

Cell phone water damage requires fast attention. If you wait too long, the damage may be just too much to be repaired. Dropping cell phones into the toilet, into a pool, into mud puddles, into washing machines and even into a glass of fruit juice is not very uncommon.

Get it out of the water as soon as possible. Most of the phones have the plastic cover lids pretty tight. It would take around 20 seconds for water to get through the covers and go inside. So, immediately remove the gadget from water. Worst case, if the phone is stuck or something, see if you can remove the battery at-least, that should prevent the short-circuit.

Switch the phone off. Once you take out the phone, switch it off. This is very important to prevent short circuits within the phone body. Remove the batteries carefully and let it dry.

Remove the SIM card. Your SIM might contain many of the important data like contact information and other stuff. It is very important to prevent damage to it. Remove it as soon as you can and let it dry. I have seen many people valuing their SIM more than the phone itself. In theory, SIM cards have better chances of surviving water damage, but that is only when you don’t let it heat but get it dry. All these are valid only if you are using GSM phones. CDMA phones do not contain SIM cards.

Dry your phone. Obviously, this is the most important step in the water damage control process. You need to remove as much water as possible from the cell phone. Shake it out (carefully) and use a cotton cloth or paper towel to gently remove the wetness.

Wet Mobile Phone Drying Tips
Hair Dryer: You think hairdryer can only help soaking your hairs? Well, not really, they can helpful drying your phone too. Switch on the hairdryer towards your phone with utmost attention to the battery. If you have speed control feature, make sure you keep it to low. if not, keep the hair dryer away from the cell phone. This is useful only to dry the outer parts. This is definitely not my preferred way to dry the wet phone, since the key is to make sure the phone doesn’t get heated up. so you would have to be very careful when using a hair dryer or a blower.
Alcohol: Place the device in the container and fill with denatured alcohol, or a 95% alcohol solution (regular rubbing alcohol is about 75%) completely submerging the device. The alcohol will displace any water left in your device. Jiggle the container around a bit to make sure the alcohol is able to drive out the water droplets in your device. You may need to weight your device to keep it under the water. Remove the device and put it somewhere to dry for an hour or two. The alcohol will evaporate very quickly but be sure it’s really dry. Make sure that the alcohol you use is denatured with only methanol as the chemicals found in other types can be damaging. This kind of alcohol can be purchased at your local hardware store. The alcohol soak may work best for phones that have been damaged by salt water or other liquids such as coffee.
Dry Rice: This is really interesting and proven method of drying your cell phone. Put the electronic device in a large Ziploc bag filled with dry rice. The rice acts as a desiccant to remove water from the air and aids in drying your device out quicker.



What NOT to do with a WET mobile phone?
Do NOT switch on the phone: I understand the urge to see if the phone is still functioning properly. But never ever try to switch it on when it is still wet.

Do NOT heat the phone: In order to quickly dry the phone, you might think of using a hair dryer at high speed or a vaccum cleaner or direct sunlight. This is a strict No-No. Avoiding the phone getting heated up is the key to save your wet phone.
Do NOT take it apart: Unless you are skilled enough with mobile phone parts.

After you have waited a day or so, make sure everything is clean and dry looking and re-attach the battery and reassemble your device to the phone and see if it works. If your phone does not work, try plugging it into its charger without the battery, if this works, you need a new battery. If not, try taking your cell phone to an authorized dealer. Sometimes they can fix it.

All mobile solution exclusive tips, Lost Mobile Tracking tips, Mobile, Mobile Care Tips, Mobile Codes, Mobile Servicing,

symphony d70 short problem solution



symphony d70 short solution


Dear Learner,
              Today i will share you How to repair symphony d70 motherboard short solution.motherboard short is many reason. Now, i will share you symphony d70 short solution. i am teasted it.

please see the image firstly :


symphony d70 short problem solution








How to done this work : at first clean full mother-board with petrol or contact cleaner freshly. then check
Red Mark Capacitor, if it false,remove Red mark capacitor, if problem still then check charging /data.

sprint 7700 power button ways

sprint 7700 power button ways


Dear Every All,

               Today i will share repair sprint 7700 power button ways solution.its may be damage or broken power button many ways. when you face this problem.you can use this solution.you can other power button related problem using this solution. how to repair sprint 7700 power button ways. please follow
my picture if repair it.


See the image bellow :

sprint 7700 power button jumper solution





How to done this work : if you face this problem first check power button using multi-metar. if you
see no connected with the diode you can make this jumper solution. if you see power button is short then
check diode,resistor,capacitor and other damage any parts change
that. when short power button then phone auto on. if all parts ok but problem still then Replace Power IC mt6305.
we confirm you successed this job.


Regards
Ridoy Sirajgonj network,BD

Google’s Android One Smart-phones To Make Their Entry in Indian Market Soon

“Google’s Android One smart-phones are going to be launched in the market by December. Continue reading this blog to get more information on the features and other important information about the devices.”

Finally, Google has launched its Android One in India, declaring three new and different smart-phones from popular manufacturers like karbonn, Micromax and Spice Mobile. Last week, the company launched three Android One smart-phones that will go on sale for 6,399 INR.

Android One is one the biggest deals for Google as Sundar Pichai, the most powerful man in the phone industry, flew down to New Delhi for the event. Google and its hardware partners - Micromax, Spice and Karbonn -- on Monday launched three Android One phones. For Google, Android One is a big deal.

In fact it is so important that Sundar Pichai, arguably the most powerful man in the phone industry and one of the most influential Google executives, flew down from his Mountain View office to New Delhi for the event.

Android One

The upcoming three smart-phones expected to be come with exclusive features and decent specs as compared to the smart-phones that 70% of Indian people are using. To make the update smoother, Google will work extremely hard on the hardware/software control.

As we said that approximately 70% of the people use featured phones in spite of having a very disposable income for a smart-phone; therefore, Google has planned Android One smart-phone for the Indian market.

The company is also hoping that Android One phones will surely lure the attention of Indian users. Moreover, it is also hoped that Android will constantly grow in the Indian market and will allow users to have a feature-rich smart-phone at budgeted cost. However, Apple has no market share in India and that is same with Microsoft’s Windows Phone.

A head of Chrome and Android Sundar Pichai said, “They will look to expand into The Philippines and Indonesia before the end of 2015, jumping into two markets with over 400 million potential customers.”

Online dealers like Amazon, Flipkart and Snapdeal are going to begin the sales of these three smart-phones by December month. Further, Google is also looking forward to plan a big advertising campaign in India for its coming Android One.

South East Asia is a favorable place for lower priced Android smart-phones, so Google will continue to offer its cheap and low-priced products for this market. So, if you are looking to purchase a budget android smart-phone, it is worth for you to wait for the launch.

Keep visiting our blog for more information on latest technology, gadgets, Android and its related solutions. You can also contact us for any of your android application development related query as our android team of professionals can help you out.

How to root Galaxy S3 on Mac

How to root Galaxy S3 on Mac :
Rooting enables you to completely customize your Android device, those of you own a Samsung Galaxy S3 and looking for root but have Mac machine instead of Windows PC to root the phone via Odin, can easily root the Galaxy S3 on Mac OSX via Heimdall, once your phone is rooted, you’ll have full control over your Galaxy S3 and you’ll be able to install any app you want. 
Read on how to root Galaxy S3 on Mac, but do keep in mind it’s just for Galaxy S3 model number GT-I9300, don’t try it on US or Canadian variants. Make sure the battery of your phone is charged and be sure to make a backup of your device data such as SMS, internet setting, contacts music files etc because the below procedure may wipe data, you can sync your contacts with Gmail account and for messages use SMS apps, lastly use file expert app to backup apps. DISCLAIMER: Please proceed the below guide at your own risk, Android Egis will not be held responsible if your device lost data or gets damaged following this guide. Instructions Step #1: Download Rooting Package (GalaxyS3RootMac.zip) to your Mac.

Step #2: Unzip the GalaxyS3RootMac.zip file. Step #3: Make sure your Galaxy S3 isn’t plugged with your Mac and turn it off. Step #4: Reboot your Galaxy S3 into download mode/Odin mode, to do so reboot phone by holding down Volume Down, Center Home, and Power buttons until you see warning screen on the phone, then press Volume up button to enter in Download mode. Step #5: Plug your Galaxy S3 to your Mac using USB cable. Step #6: Open the folder where you’ve unzipped the downloaded GalaxyS3RootMac.zip file and run heimdall-suite-1.3.2-mac.dmg, start installation and once the Heimdall is installed, reboot your computer. Step #7: From your app folder, run Heimdall-frontend app. Step #8: Select “Flash” then “Browse” and select the file “s3pit.pit” in from the folder where you’ve unzipped the GalaxyS3RootMac.zip file. Step #9: Click on “Add”, then change Partition Name into “RECOVERY”. Then select “Browse” and select the file“recovery.img” from folder the same folder “GalaxyS3RootMac.zip”. Step #10: Click on Start button to start rooting. If you face errors on Heimdall and Kies is installed, try this terminal to fix errors: sudo kextunload -b com.devguru.driver.SamsungComposite sudo kextunload -b com.devguru.driver.SamsungACMData sudo kextunload -b com.devguru.driver.SamsungACMControl Step #11: Now transfer CWM-SuperSU-v0.87.zip file to your Galaxy S3 that have in GalaxyS3RootMac folder. Step #12: Turn off your Galaxy S3. Step #13: Reboot your Galaxy S3 into Clockwork Mod Recovery by holding down volume up, home and power buttons. Step #14: Once you’re in recovery mode, select “Install Zip from SD Card” then “Choose Zip from SD Card” and locate the downloaded CWM-SuperSU-v0.87.zip file that you’ve transferred in above step and confirm installation. Step #15: Once the installation is completed, select “Go Back” after that select “Reboot System Now” to reboot the phone. That’s it, your phone is rooted now with ClockworkMod Recovery installed, enjoy! Now you can install any root-required app on your phone.

Symphony t44 charging solution

Symphony t44 charging solution



Dear Learner,

            Today i will share you Symphony t44 charging solution. its caused many ways.symphony t44 is excellent phone. it has dual sim standby,fm radio & many other things. It is very popular mobile phone of symphony. its may be charging problem on this phone. So,Now i share this phone
Charging solution.

please  see the image bellow :

Symphony t44 charging problem solution







How do this work : this mobile phones charging port is five pin micro usb port. but this port is very
weak.So,many ways broken it. maximum time may be charging problem for this reason. When broken charging port then less printed of charging line. Then its repair very hard.So,i make this solution.
if you repair this mobile phone,please following this step be carefully.

symphony ft04 charging solution

symphony ft04 charging solution


Dear Learner,

            Today i will share you symphony ft04 touch screen phone charging problems repair soltuion.if your phone charging no response or showing invalid charger or your mobile fake charging, that means showing charging but not charge save. if you face this problem then you can make this tips. you can very easily solved this problem, pleased used this soltuion.


at first see the image and follow step by step guide :



symphony ft04 charging problem solution




How to done this work :  if you face this problem then at first check charger. when it ok then check
charging port of your self phone. if it ok but problem still. then check yellow line next check
Red mark charging IC and Resistor. you can successed this job very easily.



Best Regards
Ridoy Sirajgonj Network,BD